An inflatable pool tarpaulin, also commonly called an inflatable pool cover or inflatable pool enclosure, provides a convenient and affordable way to protect your above-ground pool when it's not in use. Inflatable pool Tarpaulin creates an automatic barrier above the pool through inflation using a built-in air blower system.
Inflation Ports
Once the rings are in place, it's time to inflate. The tarpaulin comes with an electric air blower that has a long cord and an inflatable tube. Simply plug in the blower and attach the tubing end to one of the molded inflation ports along the cover's edge. Within 5-10 minutes, the blower will pump air into the tarpaulin chamber and it will rise into a dome shape over the pool.
Quality Covers
During inflation, you may need to attach additional rings and smooth out any wrinkles that form in the material. Most quality covers are made of puncture-resistant PVC or tarpaulin with reinforced seams to withstand inflation pressure.
Homeowners
Once the swimming season ends, removing the cover is equally straightforward. Homeowners simply detach the blower tubing and allow the air chamber to slowly deflate. This prevents stress on the material from a too-rapid decompression.
Outer Carrying Bag
Fully deflated, the lightweight and now thin tarpaulin sheet rolls up compactly for convenient off-season storage. Many covers come with an outer carrying bag to collect and protect the folds during storage indoors or in the garage.
Components
Storing the rolled cover loosely allows it to fully breathe and dry out between uses to prevent mold growth. The installation components like rings and blower are also safely tucked away until next season.
Proper Maintenance
With some regular post-season cleaning, proper maintenance keeps inflatable Clear Tarpaulin in top working condition to protect the pool for years to come. Rinsing away any dirt or algae buildup with a hose helps prolong the cover's lifespan.
Flexible Barrier
Once fully inflated, the air chamber inside provides a sturdy yet flexible barrier that resists winds and heavy rainfall. Many manufacturers rate their modern covers to withstand gusts up to 55 mph when installed correctly without deflating or blowing away.
Covers Position
Some advanced inflatable tarpaulin models add reinforced handles around the edge, similar to those seen on air mattresses. These make it easier to adjust the cover's position once inflated. In high wind conditions, tie-down straps or weights can further secure the perimeter.
Escaping Air
If a puncture does occur from tree branches or other pool debris, it's usually easy to locate by listening for the escaping air with the blower running. Small holes can then be patched right away with repair glue or patches included with most covers.
Inflatable Pool Tarpaulins
One of the major benefits of an inflatable pool cover is its simple, user-friendly design. As we discussed in the previous section, installation takes less than 30 minutes for most homeowners to complete independently.
Float Tests
Once installed, maintaining the proper inflation level of an inflatable tarpaulin is quite simple. Homeowners can perform regular "float tests" by gently pushing down on the cover's surface. It should easily spring back into place if at the recommended PSI.
No comments:
Post a Comment